SUPPLIES:
– Main wood piece {I used a cabinet door front}
– Finial {top wood piece}
– Spool
– Oval Wood Piece for base
– Drill
– Wood Glue
– Spray Paint
– Sand Paper {to distress}
– Clothes pin
MY LATEST VIDEOS
DIRECTIONS:
1. Mark the center of your main wood piece on the top and the bottom based off of the width of the board and the thickness of the board.
2. Drill a hole slightly larger than the screw on the finial. *If you want to make the holder sturdier and with smoother transitions, you can flatten the connecting parts on the frame using a forstner bit.
3. Drill a 3/8 in. hole in the bottom of the main wood piece/frame.
4. Drill a 3/8 in. hole through the center of the base and cut a 3/8 in. dowel to the needed length.
5. Apply glue to the spool and base and in the hole of the spool and base. Push the dowel through and let dry.
6. Apply glue to the hole in the bottom of the frame and push the remainder of the dowel through. Also screw in the finial on top.
7. Spray paint and let dry. Polyurethane for a nice finish.
8. Paint clothes pin and let dry. Mod Podge scrapbook paper on if desire. Hot glue to board.
Now you can use this baby to hang recipes, pictures or anything else you want.
For more simple and great gift ideas, be sure to check out:
